ID TECH VP3350 BLE

Please be aware that if an ID TECH VP3350 device has a low battery, it may fail to connect to the SDK. If connection issues arise and the first LED is blinking red, it is advisable to charge the device.

Power Button Operation

When the device is turned off press the power button to turn on the device. The device will automatically enter Bluetooth pairing mode.

When the device is not connected to a power source the device will enter a sleep mode and disconnect. Pressing the power button will wake up the device and a call to connectAndConfigure()must then be made to re-establish a connection.

LED Indicators

All LEDs off - Device powered off or in standby mode.
First LED Blinking Green - Device Powered on.
First LED Blinking Red - Device Low battery.
All LED flash green once - Bluetooth link established.
All LEDS flash red once - Bluetooth link dropped.
First LED green - Awaiting card entry.
All LEDS flashing red - Device in a tampered state.
All LED flashing yellow - Device deactivated.

More information can be found in our VP3350 Quick Start guides.

BBPOS Chipper 3X BT

The following information pertains to the operation of the BBPOS Chipper 3X BT device.

Power Button Operations

Power On

To power on a BBPOS Chipper 3X BT press the power button once. The device will Beep twice and the LED light will turn on to indicate the device has power up.

Power Off

To power off a BBPOS Chipper 3X BT press and hold the power button for 4 seconds.

Clear Bluetooth Pairing Keys

To clear the Bluetooth pairing keys from the device. Press the power button 5 times, then press and hold for 4 seconds.

Clearing the Bluetooth Pairing keys on the device will require the device to be re-paired. On Android devices this will need to be done via the Android settings menu.

More information can be found in our Chipper Quick Start guides.

LED Indicator

All LEDs off - Device powered off.
Red LED on - Device starting up / Charging battery.
Red LED off - Fully charged.
Red LED flashing - Low battery / Critical low battery.
Blue LED on - Bluetooth is connected.
Blue LED flashing - Standby mode / waiting for connect bluetooth or bluetooth is disconnected.

Miura

Power On

To power on the device hold down the ‘X’ (red) button until the device beeps and shows the Miura Systems logo.

Power Off

To power off the device hold down the ‘X’ (red) button until the device displays Shutting Down prompt.

Device Menu

To access the device menu press the ‘←’ (yellow) button while the device is disconnected showing its home screen.

Enter pairing mode

To enter pairing mode hold down the `✓’ (green) button until the Bluetooth indicator on screen begins to flash.

Wifi Configuration Menu

As well as via the Device Menu the Wifi Configuration menu can also be accessed by holding the ‘✓’ (green) button until the menu appears.